Torque Factory, LLC
Torque Factory, LLC
0

Torque Factory Y-Pipe with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF For K04 Based Turbos



Kit Includes:

  • Torque Factory Y-Pipe 4.5” (114mm) inlet with dual 3.5” (89mm) outlets.

  • 4.5” (114mm) MAF and Intake with bell mouthed filter (6.5” base and 10” length)

  • 3.0” (76mm) upper inlets.

  • 2.5” (63mm) lower inlets with high temp Nomex/Aramid couplers to inducers.

  • High quality couplers with OE quality clamps.

  • Port for EVAP fitting with hose or plug if not recirculated.

  • Port for crankcase vent fitting with hose or plug if not recirculated.


Notes:

  • Must use heavy duty motor mounts due to reduced clearances. 

  • If using a non factory hood, clearance must be checked. 

  • Requires MAF specific tuning.  Check with your tuner, or contact www.ETSPEC.com

Choose Quantity
$1,695.00
+ Add to Cart+ Adding to cart
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory YPipe Assembly with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory Y-Pipe with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Torque Factory Y-Pipe with 3" Upper Inlets, 2.5" Lower Inlets and 4.5" MAF
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.